Publicité
Enter "ipconfig" and press "Enter". The local dynamic IP address is displayed. Use this IP address as
the IP address in the Internet Protocol TCP/IP Properties page to complete the static IP address
configuration. Consult the local network administrator for details.
Once the static IP address has been configured, open the Internet Protocol TCP/IP Properties page
again. Select "Advanced..." to go to the TCP/IP Address page, as shown in the following figure.
Click "Add" under the IP addresses bar to add an IP address in the same segment as
"192.168.100.40". For example, IP address is 192.168.100.101 with 255.255.255.0 as the subnet
mask. Then, click "OK".
V.1
10
Publicité
