Publicité
No.
Adjusts the display brightness. Tap
1
brightness, and right to increase the brightness.
Changes the display language. Tap to activate the drop-down box, and tap to
2
select the desired language.
Adjusts the group's display mode. Selected mode is highlighted in blue. Tap the
3
grey icon to activate its mode. The two modes are mutually exclusive.
The function targets the Group Navigation at the Device Monitor and Installation.
Image on the right is related to the display of indoor units in the subgroups.
Expand to display the indoor units in the subgroups on the right. Otherwise, the
indoor units in the subgroups are merged into the subgroup folder and only the
number of indoor units is displayed.
4
If the indoor ambient temperature for T1 is displayed. Left is Display, right is No
Display. Selected mode is highlighted in blue. Tap the grey icon to activate its
mode. The two modes are mutually exclusive.
5
Unit of temperature. Selected mode is highlighted in blue. Tap the grey icon to
activate its mode. The two modes are mutually exclusive.
6 6
Set temperature, which is associated with option 5
Select °F. The set temperature interval can only be 1, which cannot be modified.
Select °C. The set temperature interval can be 0.5 or 1, which are mutually
exclusive.
7
Room temperature
0.1, 0.5. Only displayed under admin account and factory account. This option is
not available for normal accounts.
Related to the ambient temperature analysis, see the corresponding ambient
temperature analysis instructions in detail.
3.7.6 Mail Settings (Invalid for Pure Gateway Web End)
1
3
Functions
to adjust. Slide left to reduce the
2
4
Mail Settings
63
5
V.1
Publicité
