Publicité
Certain indoor units may not support one or more locks described above.
All parameters are "-" by default which means that no command is sent.
*Certain indoor unit models may not support all the lock functions mentioned above. Please consult
the engineer on details regarding the different lock functions supported by different IDU models.
*Certain wired controllers may contain a "remote control/wired control, choose 1 of 2" function. This
function is not related to the remote-lock in the JVRCM270 and they are independent.
ODU:
Outdoor unit page directly displays ODU objects.
Certain outdoor units may not support one or more lock commands described above.
The JVRCM270 can send any lock command to the outdoor unit. If the outdoor unit does not support
the lock command, the outdoor unit will process the command based on its own logic. For details on the
different lock functions supported by different outdoor units, refer to the function manual
of the corresponding outdoor unit.
All parameters are "-" by default which means that no command is sent.
46
V.1
Publicité
