Publicité
No.
Devices waiting to be selected are displayed in the rightmost area, and these
are the devices that have not been added to the selected subgroup. "1" is a
1
selected device and its top right corner is marked with
"2" is a device that has not been selected. Tap the unselected device to select
2
the device. Tap again to deselect the selected device.
Tap
devices waiting to be selected in the group are selected. Tap again to deselect all.
3
Manually cancel the selected status of a few devices after "Select All" has been
activated. Will not cancel "Select All". Tap
4
Tap to add the selected device.
Displays the device that has been added. Tap to select this operation. "5" is a
5
device that has not been selected, tap to select it.
Displays the device that has been added. Tap to select this operation. "6" is
6
a selected device, tap to deselect it. Left of the selected device is marked
with
Tap
devices waiting to be selected in the group are selected. Tap again to deselect
7
all. Manually cancel the selected status of a few devices after "Select All" has
been activated will not cancel "Select All". Tap
option.
Move the device that has been selected to be added to the group out of the "Add
8
device" queue.
9
Exit without saving.
Save and exit.
10
3. Perform the time selection once the device has been added.
1
to activate "Select All".
.
to activate "Select All".
2
3.4.1.2b Time Selection Page
Functions
is an active status. After activation, all the
again to cancel the "Select All" option.
is an active status. After activation, all the
again to cancel the "Select All"
38
.
V.1
Publicité
