Publicité
3.6 Install
Under "Install", perform operations like device search, group edit, and name change when you use
10.1 for the first time.
3.6.1 Edit
Edit the name, model, fan power, auxiliary heating power (other parameters cannot be modified) of
the indoor and outdoor units. Tap "Save" to save the edits.
Note:
The acceptable range for the model is an integer from 0 to 12, and the model corresponds to the unit
number in the device monitor.
The maximum values of the fan power and the auxiliary heating power must not exceed 65535, and
must not be negative values.
The device name length cannot exceed 12 characters. Otherwise, you will receive a prompt that the
name is ineligible. The device name cannot be duplicated.
3.6.2 Group
Tap
at the lower-left corner to go to the group editor from the installation page.
48
V.1
Publicité
