Publicité
Note:
1. Tap "+" or "-" on "Setpoint" to increase or decrease the temperature by 0.5/1 (corresponding
parameters are configured in settings);
2. Tap "+" or "-" on "Time" to increase or decrease the time by 1;
3. Tap
to copy the task with the latest implementation time and add one more minute to the
implementation time. The 23:59 command cannot be copied.
4. For the times that have been saved, tap
Note: The time on the schedule command editing interface is fixed to the 24 hour system. The
homepage display interface can be set to display the 24 or 12 hour system.
3.3.2.4 Save
Tap "Save" to save all the operations on this page, and open a new schedule to add pages. If there are
illegal or incomplete items, you will receive the corresponding prompts.
Tap "Cancel" to cancel all operations to add this schedule, and exit to the calendar view for the
schedule.
3.3.2.5 Change Schedule
Tap
on the Home Page or tap
schedule. On the Home Page, the schedule is marked by
entry point is the selected schedule.
The operating method for the schedule editor is similar to that for adding a new page. The difference
is that the screen will remain on the schedule editor page for "Save".
3.4. Report
(Files are exported to local folder when the software is opened on a Web terminal.)
On the Home Page, tap
There are 3 modules for users to choose from:
1. Operating Duration
2. Running Record
3. Energy Statistics
Tap the corresponding key to enter the module.
to edit again, and
on the schedule in the calendar view to change the
.
36
to delete.
. On the schedule view page, the
V.1
Publicité
