No.
Tap the slider to activate the dialog box. Tap "OK" to reboot the device. Tap
1
"Cancel" to cancel all operations and exit.
2
Tap the slider to activate the dialog box. Tap "OK" to restore the device to
factory settings (clear topology information, schedules, history, operating
duration, running records, energy statistics, settings). Tap "Cancel" to
cancel all operations and exit.
3
Indicates whether the power division function is enabled.
4
Import the device information, group information, and schedule information.
Work together with the export function to quickly restore the controller
operating status when the controller is replaced
5
Export the device information, group information, and schedule information.
Works in coordination with the import function to quickly restore the controller
operating status when the controller is replaced
6
Cooling only system: If a cooling only system is connected, click the slider
to activate this item.
7
Recovery after emergency stop: When this function is enabled, if the
emergency stop is released, the touch screen centralized controller
restores devices to the states that they were in before the emergency stop
was engaged. (The touch screen centralized controller only restores the
operating states of devices that are in the startup state at the time the
emergency stop was triggered.)
When this function is disabled, if the emergency stop is released, the touch
screen centralized controller will not send a startup command.
Note: This function restores only the operating mode and set temperature
of started devices. After restoration, the fan speed and angle may be
different from those at the moment when the emergency stop occurred.
8
Displays the current version of the software.
9
Tap the blue icon. The controller will automatically search for the update file
in the inserted USB root directory. Follow the prompts on the screen to
complete the operation.
Note: Never modify the update file (including the file name). Otherwise, the
system may fail to work.
Functions
67
V.1