Publicité
3.3.2.1 Add Device
5
6
7
9
No.
Devices waiting to be selected are displayed in the rightmost area, and these are the
1
devices that have not been added to the selected subgroup. "1" is a selected device
and its top right corner is marked with
2
"2" is a device that has not been selected. Tap the unselected device to select the
device. Tap again to deselect the selected device.
3
Tap
to activate "Select All".
waiting to be selected in the group are selected. Tap again to deselect all. Manually
cancel the selected status of a few devices after "Select All" has been activated will
not cancel "Select All". Tap
4
Tap to add the selected device.
5
Displays the device that has been added. Tap to select this operation. "5" is a device
that has not been selected, tap to select it.
6
Displays the device that has been added. Tap to select this operation. "6" is a
selected device, tap to deselect it. Left of the selected device is marked with
7
Tap
waiting to be selected in the group are selected. Tap again to deselect all. Manually
cancel the selected status of a few devices after "Select All" has been activated will
not cancel "Select All". Tap
8
Move the device that has been selected to be added to the group out of the "Add
device" queue.
9
Exit without saving.
10
Save and exit.
10
8
3.3.2.1 Device Selection Page
to activate "Select All".
1
3
Functions
.
is an active status. After activation, all the devices
again to cancel the "Select All" option.
is an active status. After activation, all the devices
again to cancel the "Select All" option.
30
2
4
.
V.1
Publicité
