Publicité
4.2 Software Use Precautions
a) If there are display errors on the web page such as header errors and wrong icon
placements, use the browser's mandatory refresh function to refresh the page (such as
"Shift+F5" for the Chrome browser).
b) You can only enter English characters on the touch-screen. Use the Web page if you need
to use other language and characters.
4.3 Wired Controller Group
For the new units, certain wired controllers support the access of multiple indoor units (IDU) where
these IDUs will then form a "wired controller group". In IMMPro, these IDUs will be treated as a single
virtual IDU, and in the icon view in "Device Monitor" the wired controller group of IDUs will have its own
icon. The name of the wired controller group is the same as the name of the smallest IDU.
Note: Refer to the relevant manuals on wired controllers, and indoor units for specific information on
how to set the address of the wires controller group.
"Device
monitor" icon
view
"Device monitoring"
list view
"Statistical data",
"Energy statistics"
Send control
command
WiFi information
WiFi transmit frequency range:2.400 2.4835 GHz
EIRP not more than 20dbm
IDUs in wired controller group
When one or more IDUs are offline in the wired controller group, the wired
controller group icon will display an offline status.
When there are errors in one or more IDUs in the wired controller group,
the wired controller group icon will display an error status, and the error
code will be the error code in the IDU with the smallest address.
When the wired controller group is normal, the wired controller group icon
will show the operating state of the smallest IDU.
In a list view, each IDU in the group is displayed on a separate line, and
you can view the details of each IDU in the group.
Each IDU in the group is displayed on a separate line, and you can view
the statistics of each IDU in the group.
The same commands are sent to the wired controllers in the group.
74
V.1
Publicité
