Mounting The Single Or Start Luminaire - Waldmann IDOO.pendant Mode D'emploi

ENG
3.3 Mounting the single or start
luminaire
This chapter describes how to mount a sin-
gle luminaire or a start luminaire of the lumi-
naire for daisy chaining.
Mounting the holding plate
C
Fig. 6: Mounting the holding plate.
X Guide a wire rope from above through
the recess A of the holding plate B,
see Fig. 6.
X Screw the holding plate on the con-
nection side of the luminaire together
with the grounding cable C to the ceil-
ing using suitable screws.
Mounting the ceiling fixture
Fig. 7: Mounting the ceiling fixture.
X Screw the thread D to the ceiling at the
distance a from the previously mounted
holding plate using a suitable screw, see
Tab. 2 and Fig. 7 .
28
X Guide the second wire rope E through
the sleeve F.
X Screw the sleeve on the thread.
Mounting the wire rope holder
A
B
Fig. 8: Mounting the wire rope holder.
X Guide the wire rope through the guide
bushing G of the wire rope holder H,
see Fig. 8.
X Push the guide bushing downwards
and adjust the wire rope to the desired
length.
X To fix the wire rope, release the guide
bushing.
X Unscrew the screw I from the wire
rope holder.
D
E
F
Fig. 9: Fastening the single or start luminaire
to the wire rope holder.
X Insert the wire rope J of the luminaire
into the wire rope holder, see Fig. 9.
Installation
J
G
H
I