Mounting; Mounting The Column; Removing The Cover; Mounting The Luminaire Head - Waldmann LAVIGO DPS Mode D'emploi

ENG
3.

Mounting

WARNING
Exposed electric parts.
Danger of death due to electric shock.
X Connect the luminaire to the power
supply only if the luminaire has been
mounted completely.
X Have it performed by a skilled elec-
trician only.
3.1

Mounting the column

Depending on the type of the luminaire,
the column is fastened in different ways.
CAUTION
Risk of injury caused by a tilting
luminaire.
Personal injury and material damage.
X Mount the fastening elements
correctly.
X Read in the enclosed mounting instruc-
tions how to mount the column.
3.2

Removing the cover

Fig. 1: Removing the cover.
X Unscrew the screw A from the cover B,
see Fig. 1.
X Remove the cover from the luminaire
head.
24
3.3

Mounting the luminaire head

NOTICE
Material damage caused by damaging
the electric cables at the luminaire head.
Damage to the luminaire.
X Do not jam the cables.
D
Fig. 2: Mounting the luminaire head on the
column.
X Lead the cables C from below through
the support arm D past the luminaire
head and insert the support arm com-
pletely into the column E, see Fig. 2.
H
A
Fig. 3: Fastening the luminaire head.
B
X Place the cover G from above onto the
support arm, see Fig. 3.
X Screw the screw F through the cover G
into the hole H in the support arm and
tighten the screw.
Mounting
C
E
F
G