Télécharger Imprimer la page

Parkside PAT 4 D5 Instructions De Montage page 44

Publicité

Before use
Note: Remove all packaging materials from the product.
Note: The rechargeable battery comes partly charged. Charge the battery
prior to first use, ideally at least 2–3 hours. Li-Ion batteries may be charged
at any time without reducing their life. Interrupting the charging process
does not damage the rechargeable battery.
This product is equipped with a depth discharge protection which prevents
discharging below final discharging voltage.
Do not continuously pull the trigger
in rechargeable battery.
Set the On/Off switch
used or will be stored for extended periods.
Note: If the charge indicator
is below 30 %. Please charge the battery.
Starting the charging process (see Fig. A)
Connect the USB cable
Connect the other end of the USB cable
socket
on the product.
2
Connect the charger
source. The charge indicator
will light up red whilst charging. Once the battery is charged up,
it lights up green.
Completing the charging process
Disconnect the charger
Disconnect the USB cable
the product.
44 GB/IE
to prevent damaging the built-
1
to the "0" position if the product will not be
8
lights up red during use, the charge
9
to the USB port
7a
to a 100–240 V∼ 50/60 Hz power
7
shows the charging progress. It
9
from the power source.
7
from the USB Type C socket
7a
of charger 7 .
7b
to the USB Type C
7a
on
2

Publicité

loading

Ce manuel est également adapté pour:

389438 2201