Publicité
Commissioning
Power on
At switch-on, the device displays the following pages:
Figure 5 Logo
Figure 6 Display unit Firmware information
Figure 7 Transducer Firmware information
Figure 8 Public key 1/2
Figure 9 Public key 2/2
If the maintenance command is selected after the power on, the device will enter maintenance mode (see the relevant section on
maintenance mode).
QUICK SETUP menu
This procedure is available when the instrument is switched on for the first time. The QUICK SETUP wizard appears after the
Public key. The QUICK SETUP? starting page looks as follows:
Select...
To...
run the QUICK SETUP procedure
YES
skip the procedure and no longer display
NO
the QUICK SETUP menu at next power on
skip the procedure and display the QUICK
NEXT TIME
SETUP at next power on
DCM1 - User manual | 02/07/2024 | CARLO GAVAZZI Controls SpA
7
Publicité
