Publicité
Measurement pages section
The Measuring pages section allows two functions:
Homepage: is active by default, it is the page that automatically displays after 300s of inaction. Via Modbus command, it is
l
possible to configure kWh+ (default page) or kWh- as home page;
Page filter: if it is activated, it allows to display on the screen a navigable subset of measuring pages that show some specific
l
parameters.
Note: Page filter can be enabled and selected through the SETTINGS menu or Modbus command (see Communication
Protocol).
Figure 11 Measurement pages scheme
DCM1 - User manual | 02/07/2024 | CARLO GAVAZZI Controls SpA
11
Publicité
