Publicité
Password manager
In order to access the submenu of the SETTINGS or the RESET menu, a password is required. Password is configurable through
the SETINGS menu (see the section above) or Modbus command, it can be:
Disabled: the password value is 0000, which allows to access directly to submenus (default option);
l
Enabled: if the value is different from 0000, entry is required.
l
Note: the password is meant to protect from accidental modification from the display user interface. In case the password is
forgotten, it can be read using UCS software or via Modbus. Settings modification via UCS software or Modbus command is
not protected by the password.
18
DCM1 - User manual | 02/07/2024 | CARLO GAVAZZI Controls SpA
Figure 15 Password page
Publicité
