Publicité
How to
Restoring the settings using the RESET menu
From the RESET menu you can restore the factory settings of some parameters (see relevant section). At start-up the QUICK
SET-UP menu shall be available again. Below there is a schematic reconstruction of the procedure.
Note: Metrological information can't be restored to factory settings.
Edit values in setting menu
From the SETTINGS menu, some parameters are editable, below there is a schematic reconstruction of the procedure, taking as
an example a change in the value of the Baudrate.
24
DCM1 - User manual | 02/07/2024 | CARLO GAVAZZI Controls SpA
2 X
Publicité
