Publicité
RESET menu display
The RESET menu is accessible either via display or Modbus communication; it allows the reset of some parameters (For a
detailed list of parameters, see the table below). Furthermore, the FACTORY RESET function allows to restore the default values
of the non metrological parameters. A Password is needed to access this submenu.
RESET menu parameters
This menu allows to reset the following settings:
Page title
BACK
TOTAL
PARTIAL
FACTORY RESET
Note: Total Energy Meters (kWh+ TOT and kWh- TOT) can't be reset.
Figure 14 RESET menu scheme
It allows the reset of some of the total counters, that is:
Total charge current (Ah+ TOT)
Total withdrawal current (Ah- TOT)
Total run-hour for imported energy (hh+ TOT)
Total run-hour for exported energy (hh- TOT)
Total lifetime counter of the device (Lifetime TOT)
It allows the reset of some of the partial counters, that is:
Partial imported energy (kWh+ PAR),
Partial exported energy (kWh- PAR),
Partial charge current (Ah+ PAR),
Partial withdrawal energy (Ah- PAR),
Partial run-hour for imported energy (hh+ PAR),
Partial run-hour for exported energy (hh- PAR),
Partial lifetime counter of the device (Lifetime PAR)
It resets the device to factory settings
Description
-
DCM1 - User manual | 02/07/2024 | CARLO GAVAZZI Controls SpA
17
Publicité
