Publicité
Menu section
The menu is accessible by using the button CONFIRM from the Measuring pages section; it consists of 3 submenus, which are
described below.
Note: In this section of the menu there are no icons.
Modbus commands are inhibited during the navigation of SETTINGS and RESET menu.
The Charging session start will automatically exit the menu, except when navigating the SETTINGS and RESET menu, and
display the relevant charging pages, leading directly to measurement pages when the session finishes.
SETTINGS menu
Figure 12 SETTINGS menu scheme
The SETTINGS menu allows you to set up the value of some parameters (see the table below for a complete list). If the password
is not 0000, it is required to access this submenu. If the password is set to 0000, the menu is not protected.
DCM1 - User manual | 02/07/2024 | CARLO GAVAZZI Controls SpA
13
Publicité
