Publicité
Step 5: On the front panel of the hood, un-screw one short bar and one long bar for glass window, put
the glass against the bars pre- assembled on the hood, make sure the glass is in the groove of the
stainless steel bars. Then put the short bar & long bar back on the hood, line up the screw holes and
re-assemble the screws on the bars. Do not fasten the screws too much to crack the glass.
Line up the hood with the stove tub, then fasten all bolts and screws, if ground floor is not even
and hood is not lined up with the tub, adjust the caster(s) height more or less to make the stove
even.
EN
Publicité
