Publicité
4. Spit Rod (x1)
5. Leg (x2)
6. Grill (x3)
7. Stove Tub
8. Charcoal Tray
9. Leg Support Pole
10. Motor
11. Castor (x4)
Step 1: Fit the castor wheels, lock the castor before screwing it into the legs.
Step 2: Use the socket wrench to install the legs onto the tub with M8*45 hex bolts, each leg needs 3
pcs M8*45 hex bolts. Put leg support pole in between the bottom bars of the two legs, use M8*45 hex
bolts to secure it.
On top of the leg bracket, use 1pc M8*16 hex bolt to connect the leg bracket with the side panel of
the hood, the same for the other leg bracket, so both leg brackets are attached to the side panels of
the hood.
EN
Publicité
