Publicité
26
3.4 ELECTRIC START BATTERY CONNECTION
(HG6250, HG8750, HG12,000)
WARNING!
Batteries produce explosive gases. Keep sparks, flames and cigarettes away
from the battery at all times. To prevent the possibility of creating a spark
while using the battery, connect charging cables to battery terminals first,
then to the generator. When disconnecting, disconnect the cables at the
generator first.
Positive Terminal
1.
Connect the red cable to the positive terminal of the battery. Ensure the
connection is secured by using the fastener at the battery terminal.
2.
Connect the black cable with the negative terminal of the battery. Ensure the
connection is secured by using the fastener at the battery terminal.
NOTE
Be sure to connect the Electric Start Battery to the generator set before
operation. Failure to do so will cause the output display to function
improperly. Do not reverse the polarity of the terminals when charging the
battery. Serious damage to the generator and/or battery may occur. Do
not attempt to connect the battery while the generator engine is running.
Disconnect the cables from the battery while the generator is in storage.
(Red)
HG SERIES
Negative Terminal
(Black)
Publicité
