Publicité
Product Set Up
Keep hands and fingers away from the rear wheel area
when unfolding and folding the stroller.
Rear Wheels
1
- Insert the rear wheel into the rear leg. A "click" sound
means the rear wheel is assembled completely. Repeat
on opposite side.
Check that the wheels are securely attached by pulling
on them.
2
- To remove the rear wheel, press the release button (1)
and detach the rear wheel from the rear leg (2).
Front Wheels
3
- Insert the front wheel into the front leg. A "click" sound
means the wheel is assembled completely.
Check the wheel is securely attached by pulling out.
Repeat on opposite side.
4
- To remove the front wheel, slide the release button out
(1) and then detach the front wheel from the front leg (2).
Open Stroller
5
- Open the storage latch as shown (1). Hold the bar on
the seat back (2) and rotate the handle to the rear of the
stroller (3). A "click" sound means the stroller frame is
open completely.
Check that the stroller is completely latched open before
continuing.
12
TAVO next instructions
1
click
2
2
1
3
click
4
1
2
5
2
3
1
TAVO next instructions
13
Publicité
