Publicité
short cycles.
Therefore please use long cycles when using detergent tablets, to ensure the
complete removal of detergent residuals.
This function can only be selected on Intensive, Eco or Glass program only.
To select "3-in-1" function:
a. Press
b. The 3-in-1 washing cycle will be available after pressing
light
To cancel "3-in-1" function:
To cancel the 3-in-1 washing cycle, please follow the "Changing the program in
progress" instructions.
If you decide to switch to the use of a standard detergent system, it is
recommended that you:
a. Refill both the salt and rinse aid compartments.
b. Switch the water hardness setting to the highest possible position and run
for three normal cycles without load.
c.
Readjust the water hardness setting again according to the conditions for
your region (For more information please refer to your instruction manual).
11. Press
- The programme indicator light will stop flashing.
- If delay timer is set, the selected delay hour indicator light
will illuminate. After the delay time has elapsed the appliance
will automatically operate.
12. After the program has ended, the diswasher will buzz and stop.
13. Wait for a few minutes before you open the dishwasher door in
order to avoid burns.
- Open the door carefully. Hot steam may escape when the
door is opened!
- Open the dishwasher door, leave it ajar and wait for about
15 minutes before removing the dishes. In this way they will
SDW4910WH2-SDW4910SL2-4LANG-IB.indd 123
SDW4910WH2-SDW4910SL2-4LANG-IB.indd 123
and the corresponding indicator light
will stop flashing.
to start washing.
FR
NL
will flash on the display.
and the indicator
EN
PT
123
1/3/2024 10:58 AM
1/3/2024 10:58 AM
Publicité
