Publicité
The hardness of the water varies from place to place. If hard water is used in the
dishwasher, deposits will be formed on the utensils. This appliance is equipped
with a water softener which useds a salt specifically designed to eliminate the
minerals from the water.
CAUTION:
•
Only use salt specially formulated for domestic dishwashers.
•
Do not use table salt cas it contains insoluble substanes which may
damage the water softening system.
•
Fill the salt container before starting the washing program. In this
way, the excess saline solution will be immediately removed by the water;
the prolonged presence of salt water inside the tank may lead to corrosion.
Adjusting the salt consumption
1. After the dishwasher is switched on, enter the status of adjusting the salt
consumption by holding down
display shows "H4".
2. Repeatedly press
3. Press
°Clarke
0 – 8
9 – 10
11 – 12
13 – 15
16 – 20
21 – 26
27 – 38
39 – 62
Factory setting : H4
Salt is not required when the setting is at H0.
SDW4910WH2-SDW4910SL2-4LANG-IB.indd 115
SDW4910WH2-SDW4910SL2-4LANG-IB.indd 115
USING THE WATER SOFTENER
to adjust the setting to suit the water hardness.
to validate settings.
WATER HARDNESS
Range
Soft
Soft
Medium
Medium
Medium
Hard
Hard
Hard
FR
NL
and
for about 5 seconds until the
Mmol/l
0 – 1,1
1,2 – 1,4
1,5 – 1,8
1,9 – 2,1
2,2 – 2,9
3,0 – 3,7
3,8 – 5,4
5,5 – 8,9
EN
PT
Display
H0
H1
H2
H3
H4
H5
H6
H7
115
1/3/2024 10:58 AM
1/3/2024 10:58 AM
Publicité
