Publicité
The dishwasher is
noisy.
The dishes are not
clean.
Cloudiness on glass-
ware
White spots appear
on dishes and glasses
The dishes are not
quite dry.
Dishwasher leaks.
Drain pump doesn't
stop.
Yellow or brown film
on inside surfaces
The detergent dis-
penser cover cannot
be closed properly.
Detergent left in
dispenser cups.
Steam
Black or gray marks
on dishes
Water standing on
the bottom of the tub
SDW4910WH2-SDW4910SL2-4LANG-IB.indd 131
SDW4910WH2-SDW4910SL2-4LANG-IB.indd 131
Dishes are rattling against each other.
The spray arms are knocking against
the dishes.
The dishes have not been arranged
properly.
The washing program selected is too
gentle.
Not enough detergent has been used
or it is unsuitable.
The spray arms are clogged.
The filters are not clean or not in the
correct position.
Combination of soft water and too
much detergent
Hard water area can cause limescale
deposits.
Improper loading
The rinse aid has run out or too little
is being used.
Wrong program has been selected.
Overfill dispenser or rinse aid spills.
Dishwasher is no level.
Overflow
Tea or coffee stains
Iron deposits in water can cause an
overall film.
Clogged detergent residue is blocking
the catch.
Dishes block detergent cups.
Normal phenomenon
Aluminum utensils have rubbed
against dishes.
This is normal.
FR
NL
Refer to "Loading the Dishwasher" to rearrange the
dishes.
Refer to "Loading the Dishwasher".
Select a more intensive program.
Refer to "Washing Programs".
Use more detergent or change the detergent.
Rearrange the items so that the spray arms can
rotate freely.
Clean and/or position the filters correctly.
Use less detergent if you have soft water and select
a shorter cycle to wash the glassware and to get
them clean.
Add more detergent.
Refer to "Loading the Dishwasher"..
Increase or refill the amount of rinse aid.
Choose a program with long washing time.
Be careful not to overfill the rinse aid dispenser.
Spilled rinse aid could cause oversudsing and lead to
overflowing. Wipe away any spills with a damp cloth.
Make sure the dishwasher is level.
The system is designed to detect an overflow. When
it works, it shuts off the circulation pump and turns
on the drain pump.
Using a solution of 1/2 cup of bleach and 3 cups of
warm water to remove the stains by hand.
WARNING:
You have to wait for 20 minutes after a cycle to let
the heating elements cool down before cleaning
interior; otherwise, burns will happen.
You have to call a water softener company for a
special filter.
Clean the detergent from the catch.
Re-loading the dishes properly.
There is some steam coming through the vent by
the door latch during drying and water draining.
Use a mild abrasive cleaner to eliminate those
marks.
A small amount of clean water around the outlet on
the tub bottom keeps the water seal lubricated.
EN
PT
131
1/3/2024 10:58 AM
1/3/2024 10:58 AM
Publicité
