Publicité
1. Turn the water tap on.
2. Open the dishwasher door.
3. Check the filters.
-
Ensure that they are clean and properly positioned. See the section
Cleaning and Maintenance.
4. Check that there is rinse aid and salt.
5.
Load the dishes.
-
Ensure that the spray arms can rotate freely.
6. Add the required amount of detergent into the dispenser according to the
Washing Program chart.
7. Close the dishwasher door securely.
8. Press
to switch on the dishwasher.
9. Repeatedly press
-
The corresponding programme indicator light will flash.
-
Delay Timer:
The delay timer allows you to delay the start of a washing program from
1 hour up to 24 hours.
Repeatedly press
the display, e.g. 3H for a 3-hour delay.
Once the delay timer has been set, press
To cancel the delayed start, press
10. Use 3-in-1 function :
Your dishwasher has a 3-in-1 function which does not need salt and rinse-aid but
a 3-in-1 detergent tablet for cleaning your dishes.
When using a 3-in-1 detergent tablet, the rinse-aid and salt indicator lights are
no longer. It may be
helpful to select the lowest possible setting for water hardness.
Before using 3-in-1 detergent tablets you should first check that the water
hardness in your supply is compatible with the use of these products as per the
detergent manufacturers instructions (on the product packaging).
Detergent tablets of different brands dissolve at different speeds. For this reason
some detergent cannot dissolve and develop their full cleaning power during
122
SDW4910WH2-SDW4910SL2-4LANG-IB.indd 122
SDW4910WH2-SDW4910SL2-4LANG-IB.indd 122
STARTING A WASH CYCLE
to select the desired washing program.
until the desired delayed start time is shown on
FR
NL
to activate the function.
.
EN
PT
1/3/2024 10:58 AM
1/3/2024 10:58 AM
Publicité
