Publicité
ASSEMBLY INSTRUCTIONS
fig.10
Recessed to Wall/Mantel Installation
WARNING:
Only qualified person can perform the installation.
1. Remove the glass panel from the fireplace and place it in a soft and clean location.(fig.1)
2. Place the decorative crystals in the groove of the fireplace and remove the foam from the glass.(fig.2)
3. Attach the glass to the fireplace and lock the ST4X14 screws.(fig.3, fig.4)
4. Select a dry wall/mantel to open a hole for the fireplace. Size of the hole as below chat.(fig.12)
5. Drill 5 holes on the wall and install 5 dry wall anchors on the wall.(fig.6)
6. Align the bracket with the anchors and tighten 5 screws.(fig.7)
7. Hang the 2 hooks on the back of the fireplace onto the bracket.(fig.8)
W
D
hole
Model
Number
FP1942
FP1942
H
FP1950 49.06-49.45" 17.56-17.95"
FP1950
FP1960 59.06-59.45" 17.56-17.95"
FP1960
fig.12
9
fig.11
W
H
41.08-41.48"
17.56-17.95"
104.34-105.36CM
44.60-45.59CM
124.61-125.60CM
44.60-45.59CM
150.01-151.00CM
44.60-45.59CM
D
3.66-3.86"
9.29-9.80CM
3.66-3.86"
9.29-9.80CM
3.66-3.86"
9.29-9.80CM
Publicité
