Publicité
OPERATING INSTRUCTION
CONTROL PANEL
ICONS
Digital Display
Readout of the set room temperature, timer value or the mode
Digital
Display
Adjusting Button
When the heater is on, short press the adjustment button to set the temperature. When the
heater is off, short press the adjustment button will not function.
Short press the adjustment button to adjust temperature, flame/crystal brightness, flame
color, and flame speed. Firstly, press the function button to enter the corresponding setting
interface, then short press the adjustment button to set the corresponding parameters.
Adjusting
Press and hold the adjustment button for 5 seconds, the digital will display 0, and the color
Button
and brightness of the flame and crystal will automatically change. The digital will flashes for
10 S without operating the control panel or remote control, then the display window will
return to room temperature display.
Crystal Button
Default color: blue
Short press the button to enter the Crystal color setting interface, and then short press the
Crystal button or Adjusting button, the color will recycle as following: 1. Gentian blue, 2.
Green, 3. Red, 4. Pink, 5. Yellow, 6. Capri blue, 7. Purple, 8. White, 9. Saffron, 10. Blue,
Crystal
11. Sky blue, 12. Turquoise
Button
Press and hold the Crystal button for 5 seconds to set the lightness of flame and crystal,
and then short press the Crystal button or Adjusting button, the brightness will recycle as
following: L5-L4-L3-L2-L1. L5 is the brightest.
Timer Button
Press Timer button repeatedly to change the time value between a range of 0 to 12
hours (in 1-hour intervals). If there is no operation for 10 seconds, the display will switch
from the time value to the ambient temperature.
When you find that the ambient temperature in the display does not match the actual
Timer
temperature, you can engage the temperature compensation function by pressing Timer
Button
Button and hold for 5 seconds , then increase/decrease the ambient temperature value in
the display by press the Adjusting Button on the control panel or remote control to make it
match the actual temperature. The adjustment range is "1, 2, ..., 8, 9, -9, -8, ..., -2, -1, 0".
FUNCTIONS
10
Publicité
