Publicité
ASSEMBLY INSTRUCTIONS
Free Standing Installation：
1. Remove the glass panel from the fireplace and place it in a soft and clean location.(fig.1)
2. Place the decorative crystals in the groove of the fireplace and remove the foam from the
glass.(fig.2)
3. Attach the glass to the fireplace and lock it with the ST4X14 screws.(fig.3, fig.4)
4. Align the 2 diagonal bumps on the supporting foot with the holes in the bottom of the fireplace and
screw the other 2 holes using ST4X12 screws.(fig.5 )
ASSEMBLY INSTRUCTIONS
fig.1
fig.3
7
fig.2
fig.4
fig.5
Publicité
