Publicité
ASSEMBLY INSTRUCTIONS
Wall Mounted Installation
WARNING:
Only qualified person can perform the installation.
1. Drill holes in the wall and install dry wall anchors on the wall. (fig.6)
2. Align the bracket with the anchors and tighten screws.(fig.7)
3. Remove the glass panel from the fireplace and place it in a soft and clean location.(fig.1)
4. Hang the 2 hooks on the back of the fireplace onto the bracket and mark 2 screw holes at the two
corners of the fireplace on the wall.(fig.8, fig.9)
5. Remove the fireplace and drill 2 holes in the wall and install 2 dry wall anchors.(fig.10)
6. Hang the 2 hooks on the back of the fireplace onto the bracket again and tighten 2 screws.(fig.8, fig.11)
7. Place the decorative crystals in the groove of the fireplace and remove the foam from the glass.(fig.2)
8. Attach the glass to the fireplace and lock it with the ST4X14 screws.(fig.3, fig.4)
FP1942:Drywall anchors
FP1950:Drywall anchors
FP1960:Drywall anchors
fig.6
fig.8
x 5 pcs
x 6 pcs
x 8 pcs
8
FP1942:Drywall anchors
FP1950:Drywall anchors
FP1960:Drywall anchors
fig.7
fig.9
x 5 pcs
x 6 pcs
x 8 pcs
Publicité
