Publicité
OPERATION INSTRUCTIONS
REMOTE CONTROL
ICONS
Heating Button: Adjust heating mode and temperature
Flame Button: Adjust the color and speed of the flame
Crystal Button: Adjust the color and lightness of the crystal
Timer Button: Set a time value to power off fireplace.
Adjusting Button: Adjust temperature, flame/crystal lightness, flame color, flame speed,
crystal color, timer setting
Powers the heater on or off and lock or unlock the control panel
REMOTE CONTROL BATTERY INFORMATION
To replace the batteries, follow below steps:
1. Remove the battery cover (1) from the remote by
applying pressure to it and sliding it away from the
remote.
2. Insert two AAA batteries (not included) (2).
3. Close the remote by placing the battery cover (1)
back onto it.
Note:
1. Do not mix old and new batteries.
2. Do not mix alkaline, standard (carbon-zinc),
or rechargeable (NiCad, Ni-Mh, etc) batteries.
3. Do not attempt to recharge non-recharge-
able batteries. Ensure batteries are inserted
with the correct polarity. Replace exhausted
batteries with new one.
FUNCTIONS
1
12
2
Publicité
