Télécharger Imprimer la page

Technics SC-CX700 Manuel D'utilisation page 8

Masquer les pouces Voir aussi pour SC-CX700:

Publicité

About this unit
deformed or the coating to come off.
• Stains from oil-based markers or special
chemicals cannot be removed.
Front/Left and Right Sides
(Suede-Like Artificial Leather)
• Dampen a soft, clean cloth with lukewarm
water (approximately 40 °C), wring it out
tightly, and gently pat the surface to remove
stains. After cleaning, smooth the surface
using a soft, dry brush.
Note
• Avoid vigorous rubbing as it may cause
discoloration or damage to the surface.
• If stains persist after patting, lightly brush the
surface to remove them.
Using "Technics Audio Center"
If you install the dedicated app "Technics
Audio Center" (free of charge) on your tablet/
smartphone, you can stream music files from
the device on your network to this unit and
configure the settings of sound quality, etc.
• You can set up the sound
adjustment and other settings
from the "Technics Audio Center"
app.
• For details, visit:
www.technics.com/support/
• This application is subject to change or be
discontinued with notice.
08
(08)
(Continued)
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve
the way a feature operates. These updates are
available free of charge.
• For the update information, refer to the
following website.
www.technics.com/support/firmware/
Initialization (To restore all the
settings to the factory defaults)
Disconnect the AC power supply cord from
the primary speaker.
• Wait 30 seconds before you continue with
step 2.
While pressing and holding [
of the primary speaker, connect the AC power
supply cord again.
• Keep holding down [
indicators (NET/ ) on top left end light up
and a beep sounds.
Release [
] on the top of the primary
speaker.
• The progress of the initialization is indicated
by the blinking of the LED indicator. When
initialization is complete, a beep sounds, all
the LED indicators on the top of this unit
light up for 2 seconds, and the unit turns off.
• All the settings are set back to the factory
default except wireless connection
information between primary and secondary
speakers.
] on the top
] until the two LED

Publicité

loading