Technics SC-CX700 Manuel D'utilisation page 10

Control reference guide
This unit (rear)
Primary
01 P/S LINK terminals (P/S LINK)
• Use the Speaker Link cable (supplied)
to connect the primary and secondary
speakers for a wired connection. ( 12)
02 Analog audio output terminal
(SUBWOOFER OUT)
You can connect the subwoofer, etc. with
analog audio cable (not supplied) to output
the analog audio signals.
• You can set up the output from
SUBWOOFER OUT from the "Technics
Audio Center" app. (The factory default is
"On".)
03 P/S CONNECT button (primary speaker)
• Use for the manual connection between
the primary and secondary speakers if
the wireless connection is not established
automatically. ( 12)
• Use this button to pair and register the
speakers again after repair or replacement,
although the primary and secondary
speakers are wirelessly paired by factory
default. Refer to "Owner's Manual" (PDF
format) ( 04) for details.
04 L/R ASSIGN switch
• When switching the assignment (Left/
Right) of primary speaker, the secondary
speaker is automatically assigned to the
opposite channel. ( 12)
05 HDMI terminal (HDMI ARC)
You can connect the HDMI equipment with
ARC function (TV, etc.) with HDMI cable (not
supplied) to this unit and play back music.
( 13)
• Please use Premium High Speed HDMI
cable.
10
(10)
(Continued)
06 USB-C terminal (USB-C)
You can connect the PC, etc. or another
device with USB 2.0 cable (not supplied) to
this unit and play back music. ( 14)
07 LAN terminal
( 17)
08 Optical digital input terminal (OPT IN)
You can connect a digital audio output
device, etc. with optical digital audio cable
(not supplied) and play back music. ( 13)
09 AC IN terminal (
( 15)
10 Analog audio input terminal (AUX)
You can connect an analog audio output
device with analog audio cable (not supplied)
to this unit and play back music. ( 14)
11 Analog audio input terminals (PHONO)
You can connect the turntable with PHONO
cable (not supplied) to this unit and play back
music. ( 14)
• Please use the cable less than 3 m.
12 PHONO EARTH terminal
( 14)
• For connecting the ground wire of a
turntable.
13 P/S CONNECT button (secondary
speaker)
Use this button to pair and register the
speakers again after repair or replacement,
although the primary and secondary
speakers are wirelessly paired by factory
default. Refer to "Owner's Manual" (PDF
format) ( 04) for details.
Secondary
)