Technics SC-CX700 Manuel D'utilisation page 20

Playback
Basic
■
Listening to music stored on a Bluetooth
device
1 Press [ ].
• The LED indicator (
lights up when connection is established.
(The LED indicator blinks while connecting.)
2 Select "Technics-SC-CX700-
the Bluetooth ® device's menu.
• If the device name is set in your application,
the set name is displayed.
3 Start playback on the Bluetooth
device.
Note
• To use this unit with a Bluetooth
Bluetooth device must support AVRCP (Audio
®
Video Remote Control Profile). Depending on
the status of the device, some controls may not
work.
• When enjoying video contents with this
function, the video and audio output may not
be synchronized.
• This unit can only be connected to one device
at a time.
• The Bluetooth
device will be disconnected if a
®
different audio source is selected.
External equipment
(OPT/HDMI/USB/AUX/PHONO)
You can connect the several equipment (OPT/
HDMI/USB/AUX/PHONO) to this unit and play
back music.
• Connect the equipment. ( 13, 14)
1 Press [OPT] / [HDMI] / [USB] / [AUX] /
[PHONO].
• The LED indicator on the top of this unit
lights up.
• If no device is connected, playing is not in
progress, or the file format is not supported,
the LED indicators (OPT/HDMI/USB) on the
top of this unit may blink.
2 Start playback on the connected
device.
Adjusting with the Space Tune
function
You can adjust the sound quality automatically
according to the installation location (near the
wall or the corner of the room).
Press and hold [S.TUNE AUTO] on your remote
20
(20)
(Continued)
®
) on the top of this unit
" from
****
®
® device, the
control for 2 seconds to start the sound
adjustment.
• Connect the primary and secondary speakers
before adjusting. ( 12)
• A test tone outputs quite big while the
measurement is in progress.
• The progress of the adjustment is indicated by
the blinking of the LED indicator on the top of
this unit. When the adjustment is complete, all
the LED indicators on the top of this unit light
up for 2 seconds.
• If the adjustment fails, a beep sounds 3 times,
and all the LED indicators on the top and
power indicator on the front of this unit blink
for 3 times. Press and hold [S.TUNE AUTO] for
2 seconds to set the adjustment again.
• You can set up details using "Technics Audio
Center" app.
• With the volume set to minimum, press and
hold the [-] button of the volume control on
this unit, then press [S.TUNE AUTO] to cancel
the setting.
Dear Customer
Panasonic Corporation, a company having
its registered office of 1006, Oaza Kadoma,
Kadoma City, Osaka 571-8501, Japan,
automatically collects personal data such as IP
address and/or Device ID from your device as
soon as you connect it to the Internet. We do
this to protect our customers and the integrity
of our Service as well as to protect the rights or
property of Panasonic.
You have a right of access, rectification and
objection to in certain circumstances, a right
of erasure, restriction of processing, data
portability and a right to object to other forms
of processing. If you wish to exercise any of
the above rights and/or wish to know more
about the processing of your personal data in
this context, please refer to the full text of our
privacy policy displayed at the support page of
your device, http://panasonic.jp/support/global/
cs/audio/, http://www.technics.com/support/
or contact our customer communications/
support number or address described in the Pan
European Guarantee included in your device box
to send you the full text of our privacy policy.
If you are a California resident, additional privacy
notice applies to you, in accordance with the
California Consumer Privacy Act.
Please see Appendix in the link below also.
http://panasonic.jp/support/global/cs/audio/,
http://www.technics.com/support/