Technics SC-CX700 Manuel D'utilisation page 14

Connections
Basic
Connecting PC, etc.
Type C Connector
Note
• The USB-C terminal of this unit is for data
transfer only and does not support charging
USB devices.
• For the recommended OS for your PC,
dedicated driver software (Windows OS only)
and applications, refer to "Owner's Manual"
(PDF format) ( 04).
14
(14)
(Continued)
USB 2.0 cable
(not supplied)
PC, etc.
Analog audio output device
connection
PHONO earth lead
(not supplied)
Analog audio cable
(3.5 mm (1/8"))
(not supplied)
Portable audio player, etc.
• When connecting a turntable with a built-
in PHONO equalizer, turn the equalizer of
turntable off or connect the PHONO cable to
the analog audio input terminals (PHONO) of
this unit.
• When connecting a turntable with a PHONO
earth lead, connect the PHONO earth lead to
the PHONO EARTH terminal of this unit.
Note
• Tighten the PHONO EARTH terminal using a
Phillips head screwdriver.
• If noise occurs during the playback of an
analog audio device, move the devices that
emit radio waves, such as Wi-Fi routers or
smartphones, away from this unit to reduce
the noise.
PHONO cable
(not supplied)
Turntable