Technics SC-CX700 Manuel D'utilisation page 16

Network settings
Basic
You can stream online music services or music files from your smartphone/tablet to
this unit. To use these features, this system must join the same internet-connected
network as the compatible device.
This unit can be connected to a router using a LAN cable or built-in Wi-Fi
For a stable connection to the network, a wired LAN connection is recommended.
Note
• After completing the network connection, the
LED indicator (NET) on the top of this unit lights
up when switching the input source to "NET".
(If the network connection is not established,
it blinks.)
• When the firmware update for this unit is
available, the power indicator on the front
of the primary speaker softly flickers every
10 seconds.
- For the update information, refer to the
following website.
www.technics.com/support/firmware/
16
(16)
Softly flickering
® .
■
Preparation
If you install the "Technics Audio Center" app
on your smartphone/tablet, you can set up a
connection using the application.
• When using Google Cast™-enabled apps to
play music on this unit, set up a connection
using the "Technics Audio Center" app and a
Google Assistant-enabled device.
• When using AirPlay to play music on this unit,
add the product to Home in the Apple Home
app. Adding this unit to the network via Apple
Home app will also allow the user to stream
audio using Siri.
• Make sure that the Wi-Fi function and
Bluetooth function are activated on your
®
smartphones/tablet.
1 Install the "Technics Audio
Center" app on your
smartphone/tablet. ( 08)
2 Connect your smartphone/tablet to
the same network as this unit before
setting.
• Make sure that the network is connected to
the Internet.