Publicité
To extend the life of this treadmill, the treadmill requires regular lubrication, which is general maintenance for the
machine. The routine maintenance procedure will prevent premature wear of the treadmill and motor system. The
recommended lubrication schedule is as follows:
This schedule corresponds to the recommended application for an individual user, up to 20-30 minutes at a time, 3-4
times a week.
CLEANING
Perspiration should be wiped off the console and treadmill surface after your workout. You should wipe your treadmill
once a week with a soft, damp cloth. Do not over-moisten the display panel as this may cause electrical and electronic
problems.
STORAGE
Store your treadmill in a clean, dry place. Make sure it is turned off and the plug is unplugged.
MOVING
This treadmill has been designed and equipped with wheels for easy movement. Before moving it, make sure it is
turned off and the plug is unplugged.
FOR HOME USE ONLY!
This treadmill is designed for home use only. Do not use in an institution or for commercial purposes.
MAINTENANCE LUBRICATION
It is important to take care of your treadmill (especially the running surface underneath the treadmill). Proper silicone
lubrication will also improve the performance of your treadmill.
WARNING: Turn off the treadmill and remove the safety key before lubricating the running surface.
HOW TO APPLY SILICONE TO THE TREADMILL
A/ Find the bottle of silicone. It is located in the DIY kit included with this treadmill.
B/ Find a straw and place it on the silicone bottle as shown in the drawing.
C/ Apply the silicone evenly as shown in the drawing (CAUTION: the treadmill MUST BE STOPPED before applying
the lubricant to avoid injury, otherwise the edge of the treadmill could cut you or your fingers could be crushed by the
rollers).
Do not apply too much silicone to the mat. Too much lubricant can cause the mat to slip on the rollers.
Bestellung von Einzelteilen
Für eine effizientere Abwicklung stellen Sie bitte, bevor Sie unseren Kundendienst kontaktieren, folgende Angaben
zusammen:
Den Namen oder die Artikelnummer des Produkts.
Die Fabrikationsnummer, die auf dem Hauptrahmen und dem Verpackungskarton steht.
Die Nummer des fehlenden oder schadhaften Teils, wie sie aus der diesen Informationen beigefügten
Explosionszeichnung hervorgeht.
LUBRICATION USE
1-6 km/h Every 6 months
6-12 km/h Every 3 months
12-16 km/h Every 2 months
Service Après Vente (Kundendienst)
E mail : service-de@carefitness.com
- 33 -
Publicité
