Publicité
SECTION 6 FAQ
Q: What should I do if a communication error occurs?
A: Follow the steps below to identify the problem:
1) Check if the ignition is ON.
2) Check if the ArtiDiag900 Lite VCI is securely plugged into the
vehicle's DLC port.
3) Turn the ignition off. Then, turn it on again after 10 seconds and
continue the operation.
4) Check if the vehicle's control module is defective.
Q: What special functions does the ArtiDiag900 Lite support?
A: ArtiDiag900 Lite supports 8 special functions including Oil
Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF
Regeneration, ABS Bleeding, BMS Reset and Airbag Reset.
Q: Do I need to update the firmware before using the ArtiDiag900 Lite
for the first time?
A: Yes. Firmware will automatically update to the latest version once
the ArtiDiag900 Lite VCI is connected with your ArtiDiag900 Lite
tablet via Bluetooth. You can also tap User Info > Firmware Update
to update the firmware manually.
Q: Why is the ArtiDiag900 Lite tablet screen flashing when the engine
is working?
A: That is a normal occurrence caused by electromagnetic
interference.
Q: How do I capture a screenshot?
A: Long press the Screenshot button at the top right edge of the
ArtiDiag900 Lite tablet for 3 seconds to capture a screenshot. To
view the saved pictures, go to Gallery from the home screen of the
Android System.
36
Publicité
