Publicité
Button Description
Report - tap to save the DTCs in report format. (To view the saved
reports, go to Folder > Reports > Fault Code Report)
Clear DTCs - tap to clear all the DTCs retrieved.
Clear DTCs
1. After the vehicle is identified, select the system for which you wish
to clear DTCs from the systems menu.
2. Tap Clear DTCs in the function menu.
3. Tap OK when the DTCs are cleared.
Note:
1. The procedure of clearing DTCs should be performed after the
required repair has been carried out. Once confirmed, DTCs and
freeze data stored in the ECU will be cleared.
2. DO NOT START UP THE ENGINE WHILE CLEARING DTCS.
Read Data Stream
1. After the vehicle is identified, select the system for which you wish
to read the data stream from the system menu.
2. Tap Data stream in the function menu. A data stream list
displays.
Figure 4-6
23
Publicité
