Publicité
3 CONTROLS
Alert
T5. Hydraulic
Oil
Temperature
Horn
sounds.
Hydraulic
temperature high.
T6. Hydraulic Charge Oil Filter -
Oil filter warning light comes on.
T7. Air Filter - Air filter warning light
comes on.
T8. Glow
Plug - Glow plug light
comes on.
en-16
Stop mower, disengage drives and lower implements. Run engine at low
oil
idle for a few minutes until light goes off. If light remains on, shut off engine and
allow hydraulic system to cool. Remove debris such as leaves and grass
clippings that may be restricting air flow through rear screen on hood and area
between radiator and oil cooler. If hydraulics continues to run hot, return mower
to service area.
CAUTION: Hydraulic system is under pressure. Turn engine off and allow
oil to cool before checking oil level or adding oil to tank.
Return mower to a service area as soon as possible. Change hydraulic
charge oil filter.
Return mower to a service area as soon as possible. Change air filter.
Glow plug switch depressed. Do not energize glow plugs with engine running.
Action
Publicité
