Publicité
Troubleshooting
Problem
The appliance does not
turn on
Weak suction power
Abnormal motor sounds
Battery won't charge
Blinking red light on the
appliance
Rapid blinking red light
on battery
Slow blinking red light on
battery
Note:
If the above troubleshooting guide fails to provide a solution, please visit our website
www.tineco.com for further support.
Possible cause
No power
The suction mouth is blocked
Auto protection for overheating
Dustbin and filters are full
Parts assembly is not in position
The appliance is blocked
(i.e. the tube, suction mouth or
some other parts)
The appliance is blocked
(i.e. the tube, suction mouth or
some other parts)
Vacuum is not properly placed on
the docking base
The appliance is blocked
(i.e. the tube, suction mouth or
some other parts)
The battery is overheated
The battery is out of power
16
Solution
Charge the battery
Check and remove blockages
Restart after cooling down
Clean the dustbin and filters
Check all the parts and put them
in position
Remove blockages
Remove blockages
Pull the vacuum up and place it
back on the docking base again
Wipe the charging pads with a
dry cloth
Remove blockages
Let the battery cool
Charge the battery
Publicité
