Publicité
EN
4.
For the water tank and ice-full detecting plate
The water tank and ice-full detecting plate are very important for keeping your
ice cubes hygienic. Place a mixture of neutral cleaner and water into a clean
water jet, then spray all inner surfaces of the tank and ice-full detecting plate.
Wipe these surfaces as well as possible with a clean cloth. Spray the surfaces
with clean water, wiping with a dry, clean cloth. Then, drain out the water from
the water tank by pulling out the water drainpipe (indicated by "H" in the
above illustration). When all of the cleaned water has been drained out,
reinstall the drainpipe into the water tank.
Suggestion: After cleaning and reinstalling the interior parts, discard the first
batch of ice made directly after cleaning.
Ice-Making Assembly System Cleaning by Using Nu-Calgon Nickle Safe Ice
Machine Cleaner
Minerals that are removed from water during
the freezing cycle will eventually form a hard,
scaly deposit in the water system. Cleaning the
system regularly helps remove the mineral scale
buildup. How often you need to clean the
system depends on how hard your water is. With
hard water of (4 to 5 grains/liter), factory
standards suggest cleaning the system as often
as every 6 months.
www.newair.com
29
Publicité
