Publicité
first ice-making cycle will be longer because of the relatively high-water
temperature in the water tank, The ice-making cycle will never exceed 30
minutes.
3.
Adjust ice thickness: Press the "+/－" button on the control panel to adjust
the ice thickness. The number in the bottom left of the display window is
the time setting of the ice-making process. The default setting is 0. Press
the "+" button one time to add one minutes, which will make the ice
thicker. Press the "－" button one time to reduce the time by one minute,
which will make the ice thinner. Restart the machine to return the setting
to 0.
Note: The selected settings only apply to the directly subsequent ice-making
cycle.
4.
When the
symbol lights up, this means that the ice reservoir is full. The
machine will stop working until the ice is removed. The machine will then
resume working.
5.
Shutting down the unit: When the unit is making ice, pressing the
"ON/OFF" button on the control panel will shut down the unit, which will
then enter standby mode. Holding "ON/OFF" for longer than 5 seconds
during an ice-making cycle will prompt the machine to enter the de-icing
process. This function can help remove the ice on the ice plate. Press
"ON/OFF" to shut down the machine.
6.
Timer setting (setting range: 1-24 hours)
Timed shutdown： When the unit is running, you can engage the timed
shutdown feature.
How to set the timer
Press the TIMER button. The default time setting is 1 hour ("1H" will be shown
in the display window). Then, press the "+" button to adjust to the desired
time. Every time you press the "+" button, 1 hour will be added to the time.
Press the "-" button to reduce the selected time setting. When adjusting the
time setting, the "H" in the lower corner of the display screen will flash. Then, if
the display has been flashing for 5 seconds without any buttons being pressed,
the "H" symbol will become constant, meaning the timer program has been set
successfully.
In standby mode, the display will show "5H," meaning that the unit will start
automatically after 5 hours. In ice-making mode, the display will show "5H,"
meaning that the machine will shut down automatically after 5 hours. The "H"
on the display screen indicates that the machine's timer function is currently
www.newair.com
EN
23
Publicité
