Publicité
ICE-MAKING AND WATER TANK PARTS
Water-dividing pipe: Water flows out through 9 small holes in the dividing pipe.
If no water flows out, the dividing pipe can be disassembled and cleaned.
A. Evaporator (ice-making module)
B. Ice full detecting sensor board (detects that the inner cabinet is full of ice
and checks the status of ice harvest)
C. Water tank
D. Water supply pipe
E.
Cover panel on right side of the evaporator
F.
Water level switch installation plate
G. Water tank drainpipe (when unit is making ice, this pipe should be clamped
into place on the water tank wall; when draining, the pipe should be pulled
out)
H. Water pump
I.
Water level detection switch
www.newair.com
EN
10
Publicité
