Publicité
EN
engaged. The number preceding the H will descend every hour until it reaches
zero, indicating that the timer has ended. The machine will then enter the
corresponding mode desired.
How to cancel the timer setting
When the unit timer is set, press the "TIMER" button. The timer has been
successfully canceled after the number on the screen and the "H" are both
extinguished.
When the unit timer is set, the lower left corner of the display will show both
the timer time and the ice-making setting time. The display content will
alternate every 5 seconds.
7.
Automatic self-cleaning program
The default cleaning time is 20 minutes.
Start the self-cleaning program: After connecting the water pipes, plug in the
main power supply, then press and hold the "TIMER CLEAN" button on the
control panel for more than 5 seconds. This will prompt the machine to enter
the self-cleaning program. The symbol
will rotate on the display screen,
and the time countdown area will display "20M." The "CLEAN" indicator will
always be on during this period, and the digit window will indicate the time
remaining. The water pump will run for 8 minutes, then stop for 3 minutes,
repeating this cycle. The total duration is 20 minutes for one self-cleaning
program. When the cleaning cycle stops, the water will re-supply to the water
tank automatically.
Cancel the self-cleaning program: It takes about 20 minutes to complete one
self-cleaning program. When the program is over, the system will enter its
power-off state automatically. You can also press the "ON/OFF" button on the
control panel to cancel the self-cleaning program manually.
8. How to switch from Fahrenheit(°F) to Celsius(°c)
Press and hold the "+" or "-" button for longer than 5 seconds. This will
automatically switch the setting.
www.newair.com
24
Publicité
