Publicité
Always use head protection when operating the pole saw overhead . Falling debris can
•
result in serious personal injury.
Store idle appliances indoors - When not in use, appliances should be stored indoors in a
•
dry and high or locked-up place with the battery pack removed and out of reach of children.
Maintain appliance with care - Keep cutting edge sharp and clean for best performance
•
and to reduce the risk of injury. Follow instructions for lubricating and changing accessories.
Keep handles dry, clean, and free from oil and grease.
Check damaged parts - Before further use of the product, a guard or other part that
•
is damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced by an authorized
service center unless indicated elsewhere in this manual.
Prevent unintentional starting . Ensure the switch is in the OFF position before connecting
•
to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger
on the switch or energizing appliances that have the switch ON invites accidents.
Disconnect the battery pack from the appliance before making any adjustments,
•
changing accessories, or storing appliance . Such preventive safety measures reduce the
risk of starting the appliance accidentally.
Recharge only with the charger specified by the manufacturer. A charger that is suitable
•
for one type of battery pack may create a risk of fire when used with another battery pack.
Use appliances only with specifically designated battery packs. Use of any other
•
battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper
•
clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another . Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact . If
•
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help . Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or appliance that is damaged or modified. Damaged or
•
modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of
injury.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure
•
to fire or temperature above 265°F (130°C) may cause explosion.
Follow all charging instructions and do not charge the battery pack or appliance
•
outside of the temperature range specified in the instructions. Charging improperly or
at temperatures outside of the specified range may damage the battery and increase the risk
of fire.
Have servicing performed by a qualified repair person using only identical
•
replacement parts . This will ensure that the safety of the product is maintained.
Do not modify or attempt to repair the appliance or the battery pack (as applicable)
•
except as indicated in the instructions for use and care.
ADDITIONAL WARNINGS
Use only with SKIL 40V Power Head PH0040.
•
NOTE: see owner's manual of your SKIL power head PH0040 for detailed safety rules and
operating instructions.
SAVE THESE INSTRUCTIONS!
5
Publicité
