Publicité
ASSEMBLY
WARNING
assembling parts, making adjustments, cleaning, or when not in use .
WARNING
could result in serious personal injury.
WARNING
modification is misuse and could result in a hazardous condition leading to possible serious
injury .
UNPACKING
This product requires assembly.
•
Carefully remove the product and any accessories from the box. Make sure that all items
•
listed on the box are included.
Inspect the machine carefully to make sure that no breakage or damage occurred during
•
shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily
•
operated the machine.
If any parts are damaged or missing, please return the product to the place of purchase.
•
ASSEMBLING THE GUIDE BAR
AND CHAIN
WARNING
guide bar and saw chain . These components
are sharp and may contain burrs.
WARNING
motor is running .
1. Remove the battery pack from the power
head.
2. Position the pole saw attachment on its
side on a firm, flat surface, so that the side
cover is facing up.
3. Wear gloves. Remove the side cover by
loosening the side-cover nut counterclockwise using the included multi-function wrench
(Fig. 2a).
4. Lay the saw chain in a loop on a flat surface and straighten any kinks (Fig. 2b).
5. Place the chain drive links into the guide bar groove. Position the chain so there is a loop
at the back of the guide bar (Fig. 2c).
6. Hold the chain in position on the guide bar and place the loop around the sprocket.
7. Place the guide bar on the mounting surface by sliding the guide-bar slot over the
alignment flanges. Make sure that the tension-adjusting pin is inserted in the lower hole in
the tail of the bar (Fig. 2d).
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the appliance when
If any parts are damaged or missing, do not operate this product until
the parts are replaced . Use of this product with damaged or missing parts
Do not attempt to modify this machine or create accessories not
recommended for use with this machine . Any such alteration or
Always wear protective
gloves when handling the
Never touch or adjust the
saw chain while the
Fig . 2a
11
Publicité
