Table des Matières
Publicité
To rename an existing sample data file
u u u u u
Note
• You cannot use this procedure to rename a current data file name.
1. On the E-CON2 main menu (page 1-1), press 5(GRPH).
• This displays the Graph Mode screen.
2. Press 2(DATA).
• This displays the Sampling Data List screen.
3. Use the f and c cursor keys to move the highlighting to the data file you want to
rename, and then press 3(REN).
• This displays the screen for inputting a file name.
4. Enter up to 18 characters for the new data file name, and then tap w.
• This returns to the Sampling Data List screen.
5. To return to the E-CON2 main menu (page 1-1), press J twice.
u u u u u
To delete a sample data file
1. On the E-CON2 main menu (page 1-1), press 5(GRPH).
• This displays the Graph Mode screen.
2. Press 2(DATA).
• This displays the Sampling Data List screen.
3. Use the f and c cursor keys to move the highlighting to the data file you want to
delete, and then press 4(DEL).
4. In response to the confirmation message that appears, press 1(Yes) to delete the data
file.
• To clear the confirmation message without deleting the data file, press 6(No).
• This returns to the Sampling Data List screen.
5. To return to the E-CON2 main menu (page 1-1), press J twice.
9-3
Using Sample Data Memory
20070101
20051101
Publicité
Table des Matières
