Publicité
AIR FILTRATION
The device is equipped with a suction filter (A3) that has to be replaced:
- Under normal use every 100 applications, or at least once a year.
- If it is dirty, brown or grey in colour, or clogged.
- If it is damp or wet.
- The filter must be checked at regular intervals (every 10-15 applications).
Do not wash or re-use the same filter. Regular replacement of the filter is necessary to help ensure
proper compressor performance. Contact your dealer or authorised service centre for replacement
filters.
The filter is designed so that it is always fitted in its housing. Do not replace the filter during use. Only
use original Flaem accessories or spare parts, no liability is accepted if non-original parts or
accessories are used.
To replace the filter, follow the instructions below.
1
To remove the "AIR FILTER" cover, pry it off with a small coin
of appropriate size by inserting it into the rear slot.
Pull out the dirty filter with common manicure tweezers and
insert the new one by placing it all the way into its seat.
2
Attach the "AIR FILTER" cover 1 to the unit by hooking it into
the front of the housing and 2 by pressing the back down
until it snaps into place.
32
Publicité
