Battery charging (connection with power supply unit)
Battery charging (connection with cigarette lighter socket cable)
Charging sequence
ATTENTION
The device is equipped with an auto-off function, i.e. after 20 minutes of uninterrupted operation, the
device switches off to preserve battery life and the LED light turns from green to flashing red. Please
note that the device is approved for operation for 30 minutes ON - 30 minutes OFF
Plug the power supply unit into the mains
socket, checking that it is not difficult
to disconnect from the mains.
Plug the power supply cable
into the DC plug.
Insert the plug of the cable into the 12V DC
cigarette lighter socket of the car/camper/
boat. Check the vehicle's operating manual to
ensure that the voltage supplied is 12Vdc.
Insert the "L" plug of the cigarette lighter cable
into the DC plug of the device.
Make sure the switch is OFF,
in position ( 0 ).
Flashing green = battery charging
Off = battery charged, unit ready for use
Lit red = low battery.
29